詳細描述：Ⅰ、Brief Description 產品簡述 PLATIVE VAP2010S (VAP2010W) Protective Paint is specialized applied to vacuum plating, 300 ℃ high temperature capability, corrosion resistance, good adhesion, and fast-drying, peeling easy. PLATIVE VAP2010S (VAP2010W) 專門開發應用于真空電保護漆，能耐300℃高溫，耐侵蝕，附著力好，快干，方便剝離。 Ⅱ、Operational Guidance 操作向導 First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where pvent from plating or pickling next (The corresponding additives can be used to dilute the product, SR6 for VAP2010S, SW6 for VAP2010W); painting by screen printing, pad printing, scratch, dipping, or spraying. Then air dry in 30 minutes, or forced dry at 80OC in 10 minutes. After plating, to clean the coating with the corresponding removers, or manual peel off. 先清潔并干燥工件表面，確定無油污、無灰塵；再將阻鍍漆涂于需保護位置（可用相應稀釋至需要稠度，SR6對VAP2010S，SW6對VAP2010W） ；可絲印、移印、刮涂、浸涂、噴涂等；然后自然干30分鐘左右，80攝氏度烘干10分鐘，真空電鍍后，請用相應清潔劑除去涂層，或者手工剝離。 Ⅲ、Annotation 附注 Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to pvent inhalation. 產品使用前，根據施工方法，調至適當粘度；請采用相應稀釋劑，否則可能導致油墨變質；施工時，請保持環境通風，防止吸入。
點擊圖片查看原圖
